Free tools
Hoop fit checker
Check which hoops an embroidery design fits on your machine, see when it fits only turned on its side, and find the largest design a hoop takes.
By Traci Bass · Reviewed by Patrick Bass · Updated
CraftKeep's free hoop fit checker tells you which of your embroidery machine's hoops a design fits, before you buy the design or stitch it. Enter the design's width and height, pick your machine, and it names the smallest hoop that takes it. It runs in your web browser and needs no account.
Check a design


- Open Hoop fit and choose Does my design fit?
- Under Machines, choose your brand and tick your model. You can tick up to six machines to compare them.
- Enter the design's Width and Height in inches. Decimals work, such as 4.5, and so do fractions, such as 4 1/2.
For each machine you see the smallest hoop the design fits, then every other hoop that takes it. Rotate it next to a hoop means the design fits only when turned on its side. If the design is too big, the checker shows the largest design the machine's biggest hoop takes.
The machines you ticked are listed under Checking. Choose Clear to start again with none.
Don't know the size? Choose Measure it from a file to open the embroidery file preview. Drop the design in, then choose Check hoop fit for your machine to come back with its measured size filled in.
A worked example
Say you sew on a Brother PE800. In the checker it sits with the PE900, SE2000 and similar models in one list entry, because they take the same hoops. The largest of them is the 5 × 7 in frame, 5.12 × 7.09 in inside, as Brother lists it.
| Design size you enter | What the checker says |
|---|---|
| 4.72 × 6.69 in | Fits the 5 × 7 in frames as drawn |
| 6.69 × 4.72 in | Fits the same frames, but only turned on its side (Rotate it) |
| 5.51 × 7.87 in | Too big. The largest hoop takes designs up to 4.92 × 6.89 in |
The second row is the one that catches people out. A design laid out wide fits a tall hoop once you turn it a quarter turn.
What fits this hoop?
Choose What fits this hoop?, then pick a hoop from the list. The checker shows the largest design that hoop takes, in inches, turned either way. The list shows the hoops of the machines you ticked, or every hoop of the brand you chose.
How does the checker decide a design fits?
A design fits a hoop when each side is about 0.2 in or more smaller than the hoop's sewing field. That can be as drawn, or turned on its side. CraftKeep uses the same rule for the Fits my hoop filter in your library, so the checker and your library always agree.
Why doesn't my 4×4 design fit my 4×4 hoop?
A design sold as 4×4 can be a little too big for a hoop called 4×4. Many 4 × 4 in hoops have a sewing field of 3.94 × 3.94 in. With the margin of about 0.2 in, that hoop takes designs up to 3.74 × 3.74 in. A design that measures a full 4 inches on a side needs the next hoop up. Check the measured size, not the size in the design's name.
Common mistakes
- Entering the hoop size instead of the design size. Use the design's own width and height, from the designer's listing or from the embroidery file preview.
- Typing a metric size. The boxes take inches. If a designer lists the size only in metric, convert it to inches first.
- Picking the wrong model. Models that share hoops are grouped in one entry. Look for your model's name inside the entry, such as PE800 inside "PE900, SE2000, … PE800".
- Forgetting hoops you bought separately. The checker lists the hoops each manufacturer publishes for the machine, including ones sold separately. Your own drawer may hold fewer.
On a phone or a computer
The checker works the same on a phone, tablet or computer. On a phone, the size boxes open a number keypad, and the results show below the boxes as you type.
If the machine list doesn't load, the checker says "The machine list didn't load. Check your connection and refresh the page."
Machine pages
Each machine family has its own page, starting from Hoop fit. It lists every hoop in inches, the largest sewing field and the formats the machine reads. It also answers common design sizes such as 4 × 4, 5 × 7 and 6 × 10 in. For example, the Brother page lists every Brother family, and the PE800's family has a page of its own. Hoop sizes are as published by each manufacturer, so check your machine's manual for your exact hoop.
In your CraftKeep library
Add your machine on Your machines, and CraftKeep marks the designs that work on it with a Works on your … badge. When you search, the Fits my hoop filter shows only the designs that fit a hoop you have ticked as yours. See Does this design fit my machine? and Embroidery machines, hoops and stitch details.

