Embroidery file formats explained: PES, DST, JEF, and more
Why one design arrives in a dozen formats, and what the common ones store. Then how to tell which one your machine needs, and what to do with the rest.
By Traci Bass · Reviewed by Patrick Bass · · 6 min read
Embroidery file formats such as PES, DST, JEF, EXP, VP3 and XXX are one design written for different machines. Brother reads PES, Janome reads JEF, and almost every machine reads DST. You only need the format your machine reads, plus one that keeps thread colors. CraftKeep shows which is which for every design in your library.
Buy one embroidery design and you often download a dozen files, sometimes in three hoop sizes each. This guide covers what each common format stores and how to tell which ones you actually need.
Why are there so many embroidery formats?
Each machine maker settled on its own way of writing a design down. So each family of machines reads its own format, plus a few common ones. An embroidery machine doesn't sew a picture. It sews a list of instructions: move the needle this far, make a stitch, jump to here, trim the thread, change to the next color. The mySewnet embroidery software help lists them by maker: Tajima for .dst, Janome for .jef, Melco for .exp, and Husqvarna Viking and Pfaff for .vp3.
Designers can't know which machine you own, so they save the design in every popular format and put them all in the ZIP. That's helpful when you buy. It's also why embroidery collections grow so fast: most of the files you own are copies of the same design for machines you don't have.
Can I open an embroidery file like a photo?
No. Embroidery formats are stitch files, which hold needle movements rather than pixels. Being stitch files has two consequences:
- You can't open a stitch file in an ordinary photo viewer. You need software that reads the stitches and draws them.
- Resizing a stitch file is not like resizing a photo. Stretching a design changes stitch length and density, so designers digitize separate files for each hoop size.
JPG and PNG files in a design set are pictures of the design, for browsing. The machine ignores them.
The common formats
PES
The format of Brother home machines. Every PES file also carries a PEC stitch block inside it. A PES file names its thread colors. Newer PES files (version 5 and later) include the design's own thread table, with exact colors, catalog numbers and brands. See PES embroidery files for the machines that read it.
DST
The Tajima format, and the closest thing machine embroidery has to a common language. DST is listed by more machine families in CraftKeep's hoop data than any other format, across both home and multi-needle machines. The catch: a DST file stores stitches, jumps and color changes, but no thread colors. A viewer will show stand-in colors, so keep the designer's color chart with the file. mySewnet, for one, shows such files in a default color sequence. See DST embroidery files.
JEF
The Janome format. Janome calls .jef the default format for all current Janome embroidery machines. A JEF file stores each color as a position in Janome's thread chart rather than an exact color. What you see on screen comes from that chart. See JEF embroidery files.
EXP
The Melco expanded format, also read by Bernina machines. Like DST, it stores stitches and color changes but no thread colors. See EXP embroidery files.
VP3
The format shared by Husqvarna Viking and Pfaff machines. VP3 stores a full thread record for every color: the exact color, and often the thread brand, catalog number and name. That makes it one of the more informative formats to keep. See VP3 embroidery files.
XXX
The Singer format. It stores an exact color for each thread, listed after the stitches. See XXX embroidery files.
HUS, VIP, SHV, PCS and SEW
Older formats you'll still find in many design sets. HUS, VIP and SHV are read by Husqvarna Viking and Pfaff machines in our hoop data. PCS is read by Pfaff, Husqvarna Viking and Bernina models, and SEW by several brands. If you sew on a recent machine, check its manual before keeping these. Each has its own page: HUS, VIP, SHV, PCS and SEW.
What a format stores about color


A format's color record matters more than it seems. Color information comes in three levels:
| Level | What the file holds | Formats |
|---|---|---|
| None | Only "change color here" | DST, EXP |
| Chart positions | A slot in the maker's thread chart | JEF, older PES |
| Full thread records | Exact color, often brand and number | VP3, XXX, newer PES |
When a file has no colors, the designer's PDF color chart is the only record of what the design should look like. Keep each design's stitch files and its color chart in the same folder or project, so the chart never goes missing.
Which format does my machine read?
Your machine's manual lists the formats it reads, usually on the page about USB or file transfer. Three ways to be sure:
- Check the manual or the maker's specification page. The Brother SE2000 operation manual, for example, lists .pes, .phc, .dst and .pen under data types on page 115. It also notes that DST data has no thread color information.
- Look up your machine. The free hoop fit checker lists the formats and hoops for many home and multi-needle machine families, taken from each manufacturer's own documents.
- Pick one primary format. If your machine reads several, choose the one that stores the most color information, so the screen on your machine shows the right colors.
What about the hoop size?
Format and hoop size are separate choices: pick the hoop first, then the format. A design set often has a folder per hoop: 4x4, 5x7, 6x10. Choose the folder for the hoop you will use, then the format your machine reads inside it. When in doubt, compare the design's size with your hoop's sewing field as the manufacturer lists it, both in inches. Leave about 0.2 in to spare.
Do you need to keep every format?
If you only stitch on one machine, the other formats are copies you will never sew. Many people keep them anyway, just in case they change machines one day. A practical middle path:
- Keep your machine's format and one color-rich format (VP3 or a newer PES) for every design.
- Keep DST if you might ever send a design to someone with a different machine, since so many machines read it.
- Move the rest somewhere you can get them back from, rather than removing them for good.
How to view embroidery files without embroidery software


The free embroidery file preview shows what is inside a single file. It opens PES, DST, JEF, EXP, VP3 and XXX files right in your browser, and the file stays on your device.
For a whole collection, CraftKeep draws a picture of every design in 38 embroidery formats. All but Bernina ART also show their stitch count, size and the hoop they fit, and their thread colors where the file stores them. Add your machine on Your machines, and each project opens on the formats it reads. Remove formats you don't use then moves the formats your machine can't read to Trash in three guided steps. A design that exists in only one format stays where it is. See how it works in the embroidery file organizer, or browse every supported format.
Quick reference
- PES: Brother home machines; colors named, exact in newer files
- DST: read almost everywhere; no thread colors
- JEF: Janome; colors as chart positions
- EXP: Melco and Bernina; no thread colors
- VP3: Husqvarna Viking and Pfaff; full thread records
- XXX: Singer; exact colors
Next: how to read a thread conversion chart when a design calls for a thread brand you don't own, or how to organize embroidery files so every format of a design stays together.
Brother, Bernina, Janome, Pfaff, Husqvarna are trademarks of their respective owners. CraftKeep is not affiliated with these companies.
Try it with your own files
Make a free CraftKeep library and see your machine embroidery files as pictures you can search.
No credit card needed

