Husqvarna Viking Designer Epic 3 hoop sizes and embroidery field
The Husqvarna Viking Designer Epic 3 embroidery machine takes 11 hoops, up to a sewing field of 17.72 × 17.72 in. It reads SHV, VP3, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP and DST files.
Hoops
| Hoop | Sewing field | Largest design |
|---|---|---|
| DESIGNER Splendid Square Hoop II (4.7 × 4.7 in) | 4.72 × 4.72 in | 4.53 × 4.53 in |
| DESIGNER EPIC 3 Free Arm Hoop (3.9 × 5.9 in)Optional | 3.94 × 5.91 in | 3.74 × 5.71 in |
| Medium Metal Embroidery Hoop (7 × 5 in)Optional | 7.09 × 5.12 in | 6.89 × 4.92 in |
| DESIGNER Jewel Hoop II (9.4 × 5.9 in) | 9.45 × 5.91 in | 9.25 × 5.71 in |
| Special Techniques Hoop (9.4 × 5.9 in)Optional | 9.45 × 5.91 in | 9.25 × 5.71 in |
| Quilter's Metal Embroidery Hoop (8 × 8 in)Optional | 7.87 × 7.87 in | 7.68 × 7.68 in |
| Mega Quilter's Embroidery Hoop (10.2 × 10.2 in)Optional | 10.24 × 10.24 in | 10.04 × 10.04 in |
| DESIGNER Royal Hoop II (14 × 8 in) | 14.17 × 7.87 in | 13.98 × 7.68 in |
| DESIGNER EPIC 3 Magnetic Hoop (14.2 × 9.1 in)Optional | 14.17 × 9.06 in | 13.98 × 8.86 in |
| DESIGNER Regal Hoop (18.3 × 10.2 in) | 18.31 × 10.24 in | 18.11 × 10.04 in |
| Mega Turnable Hoop (17.7 × 17.7 in)Optional | 17.72 × 17.72 in | 17.52 × 17.52 in |
Will it fit? Common design sizes
Will a 4 × 4 in design fit? Yes
The smallest hoop it fits is the DESIGNER Splendid Square Hoop II (4.7 × 4.7 in).
Will a 5 × 7 in design fit? Yes
The smallest hoop it fits is the Medium Metal Embroidery Hoop (7 × 5 in), turned on its side.
Will a 6 × 10 in design fit? Yes
The smallest hoop it fits is the Mega Quilter's Embroidery Hoop (10.2 × 10.2 in).
Will a 8 × 8 in design fit? Yes
The smallest hoop it fits is the Mega Quilter's Embroidery Hoop (10.2 × 10.2 in).
Will a 8 × 12 in design fit? Yes
The smallest hoop it fits is the DESIGNER EPIC 3 Magnetic Hoop (14.2 × 9.1 in), turned on its side.
Will a 10 × 10 in design fit? Yes
The smallest hoop it fits is the Mega Quilter's Embroidery Hoop (10.2 × 10.2 in).
Check your design on the Husqvarna Viking Designer Epic 3
Enter the design's width and height to see the hoops it fits.
A design fits when each side is about 0.2 in or more smaller than the hoop's sewing field, as drawn or turned on its side.
Don't know the size? Open the embroidery file preview to measure it.
Husqvarna Viking Designer Epic 3 hoop questions
What is the largest hoop for the Husqvarna Viking Designer Epic 3?
Mega Turnable Hoop (17.7 × 17.7 in), a sewing field of 17.72 × 17.72 in, as published by Husqvarna Viking.
Will a 5 × 7 in design fit the Husqvarna Viking Designer Epic 3?
Yes. A design made for a 5 × 7 in hoop fits the Medium Metal Embroidery Hoop (7 × 5 in) when turned on its side.
Which embroidery file formats does the Husqvarna Viking Designer Epic 3 read?
The Husqvarna Viking Designer Epic 3 reads SHV, VP3, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP and DST files.
Which common design sizes fit the Husqvarna Viking Designer Epic 3?
Designs made for 4 × 4 in, 5 × 7 in, 6 × 10 in, 8 × 8 in, 8 × 12 in and 10 × 10 in hoops fit one of its hoops. Use the checker on this page for any other size.
Hoop sizes as published by Husqvarna Viking. Check your machine's manual for your exact hoop. Sizes checked November 5, 2026.
Keep your designs where you can find them.
Every design shown as a picture, with its size, and its colors where the file stores them.
No credit card needed

