CraftKeepCraftKeep
Start free

Janome Continental M17 hoop sizes and embroidery field

The Janome Continental M17 embroidery machine takes 5 hoops, up to a sewing field of 11.02 × 18.11 in. It reads JEF, JPX and DST files.

Hoops

Janome Continental M17 hoops and sewing fields
HoopSewing fieldLargest design
SQ10d (4 × 4 in)3.94 × 3.94 in3.74 × 3.74 in
RE20d (5.5 × 7.9 in)5.51 × 7.87 in5.31 × 7.68 in
ASQ27d (AcuFil quilting hoop, bonus kit) (10.6 × 10.6 in)10.63 × 10.63 in10.43 × 10.43 in
SQ28d (11 × 11 in)11.02 × 11.02 in10.83 × 10.83 in
RE46d (11 × 18.1 in)11.02 × 18.11 in10.83 × 17.91 in

Will it fit? Common design sizes

  • Will a 4 × 4 in design fit? Yes

    The smallest hoop it fits is the RE20d (5.5 × 7.9 in).

  • Will a 5 × 7 in design fit? Yes

    The smallest hoop it fits is the RE20d (5.5 × 7.9 in).

  • Will a 6 × 10 in design fit? Yes

    The smallest hoop it fits is the ASQ27d (AcuFil quilting hoop, bonus kit) (10.6 × 10.6 in).

  • Will a 8 × 8 in design fit? Yes

    The smallest hoop it fits is the ASQ27d (AcuFil quilting hoop, bonus kit) (10.6 × 10.6 in).

  • Will a 8 × 12 in design fit? Yes

    The smallest hoop it fits is the RE46d (11 × 18.1 in).

  • Will a 10 × 10 in design fit? Yes

    The smallest hoop it fits is the ASQ27d (AcuFil quilting hoop, bonus kit) (10.6 × 10.6 in).

Check your design on the Janome Continental M17

Machines (up to 6)

Checking: Janome Continental M17.

Design size
Measure it from a file

Enter the design's width and height to see the hoops it fits.

A design fits when each side is about 0.2 in or more smaller than the hoop's sewing field, as drawn or turned on its side.

Don't know the size? Open the embroidery file preview to measure it.

Janome Continental M17 hoop questions

What is the largest hoop for the Janome Continental M17?

RE46d (11 × 18.1 in), a sewing field of 11.02 × 18.11 in, as published by Janome.

Will a 5 × 7 in design fit the Janome Continental M17?

Yes. A design made for a 5 × 7 in hoop fits the RE20d (5.5 × 7.9 in).

Which embroidery file formats does the Janome Continental M17 read?

The Janome Continental M17 reads JEF, JPX and DST files.

Which common design sizes fit the Janome Continental M17?

Designs made for 4 × 4 in, 5 × 7 in, 6 × 10 in, 8 × 8 in, 8 × 12 in and 10 × 10 in hoops fit one of its hoops. Use the checker on this page for any other size.

Hoop sizes as published by Janome. Check your machine's manual for your exact hoop. Sizes checked November 5, 2026.

Keep your designs where you can find them.

Every design shown as a picture, with its size, and its colors where the file stores them.