CraftKeepCraftKeep
Start free

Singer Legacy SE300 hoop sizes and embroidery field

The Singer Legacy SE300 embroidery machine takes 2 hoops, up to a sewing field of 10.24 × 5.91 in. It reads XXX and DST files.

Hoops

Singer Legacy SE300 hoops and sewing fields
HoopSewing fieldLargest design
Small Embroidery Hoop (4 × 4 in)3.94 × 3.94 in3.74 × 3.74 in
Large Embroidery Hoop (10.2 × 5.9 in)10.24 × 5.91 in10.04 × 5.71 in

Will it fit? Common design sizes

  • Will a 4 × 4 in design fit? Yes

    The smallest hoop it fits is the Large Embroidery Hoop (10.2 × 5.9 in).

  • Will a 5 × 7 in design fit? Yes

    The smallest hoop it fits is the Large Embroidery Hoop (10.2 × 5.9 in), turned on its side.

  • Will a 6 × 10 in design fit? No

    A 6 × 10 in design (up to 5.80 × 9.80 in) is bigger than this machine's largest hoop.

  • Will a 8 × 8 in design fit? No

    A 8 × 8 in design (up to 7.80 × 7.80 in) is bigger than this machine's largest hoop.

  • Will a 8 × 12 in design fit? No

    A 8 × 12 in design (up to 7.80 × 11.80 in) is bigger than this machine's largest hoop.

  • Will a 10 × 10 in design fit? No

    A 10 × 10 in design (up to 9.80 × 9.80 in) is bigger than this machine's largest hoop.

Check your design on the Singer Legacy SE300

Machines (up to 6)

Checking: Singer Legacy SE300.

Design size
Measure it from a file

Enter the design's width and height to see the hoops it fits.

A design fits when each side is about 0.2 in or more smaller than the hoop's sewing field, as drawn or turned on its side.

Don't know the size? Open the embroidery file preview to measure it.

Singer Legacy SE300 hoop questions

What is the largest hoop for the Singer Legacy SE300?

Large Embroidery Hoop (10.2 × 5.9 in), a sewing field of 10.24 × 5.91 in, as published by Singer.

Will a 5 × 7 in design fit the Singer Legacy SE300?

Yes. A design made for a 5 × 7 in hoop fits the Large Embroidery Hoop (10.2 × 5.9 in) when turned on its side.

Which embroidery file formats does the Singer Legacy SE300 read?

The Singer Legacy SE300 reads XXX and DST files.

Which common design sizes fit the Singer Legacy SE300?

Designs made for 4 × 4 in and 5 × 7 in hoops fit one of its hoops. Use the checker on this page for any other size.

Hoop sizes as published by Singer. Check your machine's manual for your exact hoop. Sizes checked November 5, 2026.

Keep your designs where you can find them.

Every design shown as a picture, with its size, and its colors where the file stores them.