CraftKeepCraftKeep
Start free

Machines and export

Why my machine couldn't see my designs

Your embroidery machine shows an empty USB drive or broken designs? The five usual reasons, from the drive format to hidden files, and how to fix each.

By Traci Bass · Reviewed by Patrick Bass · Updated

An embroidery machine that shows an empty USB drive, or designs it can't open, almost always has one of five problems. They are the drive's format, hidden computer files, the wrong folder, a drive that is too big, or unusual characters in file names. The CraftKeep add-on for Windows and Mac fixes all five.

Each section below says what goes wrong and how to fix it, by hand or with the add-on. The add-on's steps are in Set up a USB drive for your embroidery machine.

1. The drive is set up the wrong way

USB drives in the CraftKeep app on a computer: the machine brand chosen, and two USB drives, one ready for the machine with Load designs onto this drive, and one too large with Set up for my machine.
In the CraftKeep app, USB drives can set a drive up for your machine.

Every USB drive is set up, or "formatted", in a particular way. Most new drives, especially bigger ones, come set up for computers in a way embroidery machines can't read. The machine then sees an empty drive, even when the designs are on it.

Embroidery machines read drives formatted as FAT32, with the whole drive as one single part. In the CraftKeep add-on, open USB drives and pick your machine. Each drive then shows one of three notes:

The drive says What it means
Ready for your machine The drive is set up the way machines expect.
Needs formatting The drive is set up for computers, not machines.
Too large for most machines The drive is bigger than most machines read.

Choose Set up for my machine, tick I understand, then choose Format. CraftKeep sets the drive up the way machines expect and makes the folders your machine looks in. Everything on the drive is erased, so copy off anything you want to keep first.

2. Hidden files from a computer

Computers quietly add hidden files to USB drives. A Mac adds files whose names start with "._", plus one called ".DS_Store". Windows can add "Thumbs.db" and "desktop.ini". Your machine may show these as designs it can't open. Some machines, Bernina in particular, can restart when they find them.

In the CraftKeep add-on, choose Clean this drive to remove them. Your designs are left alone. Tick Also remove files that aren't designs to clear out other leftovers too, such as old photos. CraftKeep also sweeps the hidden files away every time you choose Eject, so a drive you always eject from CraftKeep stays clean.

Plugging the drive back into a Mac can add the hidden files again. Clean it, or eject it from CraftKeep, before it goes back to the machine.

3. Are the designs in the wrong folder?

Often, yes: machines only look in certain places.

  • Janome and elna machines look in a folder called EMB, inside a folder called Embf. Designs anywhere else don't show.
  • Brother and Baby Lock machines look at the top of the drive, and one folder down.
  • Many machines don't look inside folders inside folders.

Some machines also show only the first 100 designs in a folder, so the rest seem to be missing. The CraftKeep add-on puts every design where your machine looks, and tells you before a folder goes over 100 designs. For most machines it then offers Use smaller folders, so every design shows, or Keep one folder. A machine that reads only one folder can't be split. CraftKeep says so, and you can load fewer designs instead.

4. Is the drive too big for the machine?

Many machines can't read big drives. Brother recommends 32 GB or less. Some Janome and elna machines read even less. The MC15000 reads up to 16 GB, the MC12000 and elna 900 up to 4 GB, and the MC11000 up to 2 GB. Some older machines also read every file on the drive when you plug it in. On a big, full drive, that can look as if the machine has frozen.

Use a small drive, or let the CraftKeep add-on set up 32 GB of a bigger drive. The rest of the drive is left unused. For a machine that reads less than 32 GB, use a drive no bigger than it reads.

5. Do unusual characters in file names matter?

Yes. Machines show plain letters and numbers, and names with accents, symbols or emoji may not show at all. When CraftKeep loads designs onto a drive, it gives each one a plain name your machine can show. Two designs that end up with the same plain name get "-2", "-3" and so on. When loading finishes, CraftKeep says how many designs got simpler names. Your designs in CraftKeep keep their real names.

Why won't my Bernina design open?

A Bernina .exp design needs its two partner files beside it on the drive: an .inf file and a .bmp file. Copying the three together keeps the design whole. The CraftKeep add-on copies the matching .inf and .bmp files along with each .exp design. Its cleaning also keeps stray hidden files from making the machine restart.

Still not showing?

A CraftKeep project showing only PES files, the main format of the Brother machine you added: stitch pictures of a bat, Boo, candy corn and pumpkins, each marked Works on your Brother.A CraftKeep project showing only PES files, the main format of the Brother machine you added: stitch pictures of a bat, Boo, candy corn and pumpkins, each marked Works on your Brother.
A project filtered to PES, one of the formats a Brother reads.

Check that the design is a format your machine reads, such as .pes for Brother or .jef for Janome. When the CraftKeep add-on loads a drive, it copies only the formats your chosen machine reads. If it says there are no designs for your machine in that choice, the project has none in your machine's format.

Add your machine on Your machines and CraftKeep shows those formats first. See Embroidery machines, hoops and stitch details.

A few more things to try:

  • Eject before unplugging. Choose Eject in CraftKeep and wait for "Safe to remove". Pulling the drive out mid-copy can leave a design that looks present but won't open.
  • Try a different drive. A small, plain drive is the easiest test.
  • Use a computer. The add-on works on Windows and Mac computers. On a phone or tablet, CraftKeep can't set up or clean a USB drive, so do those jobs on a computer.

If you're still stuck, we're happy to help.

Sources

Ask for help