Organizing
Moving designs between projects
Move a design to another project by dragging it onto the menu on the left, or with Move to… if you'd rather not drag. Undo puts it back.
By Patrick Bass · Reviewed by Traci Bass · Updated
To move a design to another project in CraftKeep, drag its picture onto that project in the menu on the left. If you'd rather not drag, choose More on the design, then Move to…, and pick the project from a short list. Either way, an Undo button appears straight after, so a wrong move is easy to put right.
Drag a design onto a project

The menu on the left lists your designers and their projects. You can drop a design straight onto one of them.
- Open the project that has the design in it.
- In the menu on the left, choose Show beside Designers. Each designer appears.
- Choose Show beside the designer you want, and their projects appear.
- Click and hold the design's picture. Keep holding, and move it over to the project in the menu.
- Let go, and the design moves into that project.
If the designer you want is still closed, hold the design over the designer's name for a moment. The designer opens, and you can drop the design on one of its projects.
A message then says what happened, such as "Moved Rose.pes to Spring Florals." The project you dropped on is highlighted while you hold the design over it. If nothing lights up, that spot can't take a design. Designs go into projects, and a design dropped on Trash at the bottom of the menu goes into Trash instead.
How do I move a design without dragging?

Use the More button on the design's picture, then Move to…. This way works with a mouse, a keyboard or a finger, and nothing has to be held down.
- Choose More on the design's picture.
- Choose Move to….
- A short list of your projects opens under "Move it to which project?". Type a few letters of the project's name to find it.
- Pick the project.
- Choose Move to with the project's name, such as Move to Winter 2.
The list leaves out the project the design is already in. On a computer with a mouse, More shows when you point at the picture. On a touch screen it is always showing, in the top right corner of the picture.
Move several designs at once

- Tick the checkbox on each design you want to move.
- A bar appears at the bottom of the screen, saying how many designs are chosen.
- Choose Move to… in the bar, then pick the project as above.
You can also drag a group. Tick the designs first, then drag any one of them. The card that follows your pointer says how many you are carrying, such as "3 designs", and they all move together.
Can I undo a move?
Yes. After every move, a message shows with an Undo button for about 10 seconds. Choose Undo and the design goes straight back where it was. If the message has gone, simply move the design back the same way you moved it.
What happens on a phone or tablet?
On a phone, use More and Move to…. A phone's screen is too narrow for the menu on the left to stay open. The menu folds away behind the Menu button, so there is nowhere to drop a design. On a computer, or a tablet with a wide screen, the menu stays on screen and dragging works. On a touch screen, press and hold the picture for a moment before you start moving your finger. A quick tap still opens the design.
A worked example
You added a Kimberbell ZIP and three snowman designs landed in "Winter 1" by mistake. They belong in "Winter 2".
- Open Winter 1 and tick the three snowman designs.
- Choose Move to… in the bar at the bottom.
- Type "win" and pick Winter 2.
- Choose Move to Winter 2.
The message says "Moved 3 designs to Winter 2." If Winter 2 already had a file called Snowman-1.pes, CraftKeep would ask first, as the next section explains.
Where does a moved design go?
A moved design goes to the top of the new project, outside any folder.
- Where it lands. The design goes to the top of the new project, outside any folder. To put it in a folder there, use Move to another folder in the same More menu.
- Same names. If the other project already has a file with the same name, CraftKeep asks first: "This file is already in Winter 2." Choose Replace file to go ahead, or Cancel to leave both where they are. A replaced file isn't lost, because CraftKeep keeps the old copy as an earlier version. See Trash and earlier versions.
- The file itself doesn't change. Moving changes only where the design sits in your library. Its name, picture, stitch details and tags stay the same.
- In a group library. Contributors, Administrators and the Owner can move designs. Members and Viewers don't see Move to…, and their drags don't move anything.
Why didn't my design move?
Usually the design was dropped on a designer instead of a project, or let go before the project lit up.
- Dropping on a designer instead of a project. A design can only go into a project. Open the designer with Show and drop the design on one of its projects.
- Letting go too soon. If you let go before the project is highlighted, nothing moves. Pick the design up again and hold it over the project until it lights up.
- Moving a whole project by mistake. A project row dropped on a designer moves the whole project, with all its files, to that designer. To move one design, drag the design's own picture from inside the project.
To move a whole project to a different designer, see Designers and projects. To group projects without moving them, see Putting projects in a collection.

