CraftKeepCraftKeep
Start free

Ricoma EM-1010 hoop sizes and embroidery field

The Ricoma EM-1010 multi-needle embroidery machine takes 5 hoops, up to a sewing field of 12.20 × 8.30 in. It reads DST files.

Hoops

Ricoma EM-1010 hoops and sewing fields
HoopSewing fieldLargest design
Hoop A (2.7 × 1.9 in)2.70 × 1.90 in2.50 × 1.70 in
Hoop B (4.3 × 4.3 in)4.30 × 4.30 in4.10 × 4.10 in
Hoop C (7.5 × 5.5 in)7.50 × 5.50 in7.30 × 5.30 in
Hoop D (12.2 × 8.2 in)12.20 × 8.20 in12.00 × 8.00 in
Maximum Embroidery Area (12.2 × 8.3 in)12.20 × 8.30 in12.00 × 8.10 in

Will it fit? Common design sizes

  • Will a 4 × 4 in design fit? Yes

    The smallest hoop it fits is the Hoop B (4.3 × 4.3 in).

  • Will a 5 × 7 in design fit? Yes

    The smallest hoop it fits is the Hoop C (7.5 × 5.5 in), turned on its side.

  • Will a 6 × 10 in design fit? Yes

    The smallest hoop it fits is the Hoop D (12.2 × 8.2 in), turned on its side.

  • Will a 8 × 8 in design fit? Yes

    The smallest hoop it fits is the Hoop D (12.2 × 8.2 in).

  • Will a 8 × 12 in design fit? Yes

    The smallest hoop it fits is the Hoop D (12.2 × 8.2 in), turned on its side.

  • Will a 10 × 10 in design fit? No

    A 10 × 10 in design (up to 9.80 × 9.80 in) is bigger than this machine's largest hoop.

Check your design on the Ricoma EM-1010

Machines (up to 6)

Checking: Ricoma EM-1010.

Design size
Measure it from a file

Enter the design's width and height to see the hoops it fits.

A design fits when each side is about 0.2 in or more smaller than the hoop's sewing field, as drawn or turned on its side.

Don't know the size? Open the embroidery file preview to measure it.

Ricoma EM-1010 hoop questions

What is the largest hoop for the Ricoma EM-1010?

Maximum Embroidery Area (12.2 × 8.3 in), a sewing field of 12.20 × 8.30 in, as published by Ricoma.

Will a 5 × 7 in design fit the Ricoma EM-1010?

Yes. A design made for a 5 × 7 in hoop fits the Hoop C (7.5 × 5.5 in) when turned on its side.

Which embroidery file formats does the Ricoma EM-1010 read?

The Ricoma EM-1010 reads DST files.

Which common design sizes fit the Ricoma EM-1010?

Designs made for 4 × 4 in, 5 × 7 in, 6 × 10 in, 8 × 8 in and 8 × 12 in hoops fit one of its hoops. Use the checker on this page for any other size.

Hoop sizes as published by Ricoma. Check your machine's manual for your exact hoop. Sizes checked November 5, 2026.

Keep your designs where you can find them.

Every design shown as a picture, with its size, and its colors where the file stores them.