Ricoma Marquee MT-1501, MT-2001, Marquee Two-Head (15-needle and 20-needle), Marquee Three-Head (20-needle) hoop sizes and embroidery field
The Ricoma Marquee MT-1501, MT-2001, Marquee Two-Head (15-needle and 20-needle), Marquee Three-Head (20-needle) multi-needle embroidery machine takes 7 hoops. Its largest sewing field is 21.30 × 14.20 in. It reads DST files.
Hoops
| Hoop | Sewing field | Largest design |
|---|---|---|
| Hoop A (3.5 × 3.5 in) | 3.50 × 3.50 in | 3.30 × 3.30 in |
| Hoop B (4.7 × 4.7 in) | 4.70 × 4.70 in | 4.50 × 4.50 in |
| Hoop C (6 × 6 in) | 5.90 × 5.90 in | 5.70 × 5.70 in |
| Hoop D (7.5 × 7.5 in) | 7.50 × 7.50 in | 7.30 × 7.30 in |
| Hoop E (11.4 × 11.4 in) | 11.40 × 11.40 in | 11.20 × 11.20 in |
| Maximum Embroidery Area (19.7 × 14.2 in) | 19.70 × 14.20 in | 19.50 × 14.00 in |
| Hoop F (Oval) (21.3 × 14.2 in) | 21.30 × 14.20 in | 21.10 × 14.00 in |
Will it fit? Common design sizes
Will a 4 × 4 in design fit? Yes
The smallest hoop it fits is the Hoop B (4.7 × 4.7 in).
Will a 5 × 7 in design fit? Yes
The smallest hoop it fits is the Hoop D (7.5 × 7.5 in).
Will a 6 × 10 in design fit? Yes
The smallest hoop it fits is the Hoop E (11.4 × 11.4 in).
Will a 8 × 8 in design fit? Yes
The smallest hoop it fits is the Hoop E (11.4 × 11.4 in).
Will a 8 × 12 in design fit? Yes
The smallest hoop it fits is the Maximum Embroidery Area (19.7 × 14.2 in).
Will a 10 × 10 in design fit? Yes
The smallest hoop it fits is the Hoop E (11.4 × 11.4 in).
Check your design on the Ricoma Marquee MT-1501
Enter the design's width and height to see the hoops it fits.
A design fits when each side is about 0.2 in or more smaller than the hoop's sewing field, as drawn or turned on its side.
Don't know the size? Open the embroidery file preview to measure it.
Ricoma Marquee MT-1501 hoop questions
What is the largest hoop for the Ricoma Marquee MT-1501?
Hoop F (Oval) (21.3 × 14.2 in), a sewing field of 21.30 × 14.20 in, as published by Ricoma.
Will a 5 × 7 in design fit the Ricoma Marquee MT-1501?
Yes. A design made for a 5 × 7 in hoop fits the Hoop D (7.5 × 7.5 in).
Which embroidery file formats does the Ricoma Marquee MT-1501 read?
The Ricoma Marquee MT-1501 reads DST files.
Which common design sizes fit the Ricoma Marquee MT-1501?
Designs made for 4 × 4 in, 5 × 7 in, 6 × 10 in, 8 × 8 in, 8 × 12 in and 10 × 10 in hoops fit one of its hoops. Use the checker on this page for any other size.
Hoop sizes as published by Ricoma. Check your machine's manual for your exact hoop. Sizes checked November 5, 2026.
Keep your designs where you can find them.
Every design shown as a picture, with its size, and its colors where the file stores them.
No credit card needed

