Ricoma Embroidery and Chenille Combo hoop sizes and embroidery field
The Ricoma Embroidery and Chenille Combo multi-needle embroidery machine takes 7 hoops, up to a sewing field of 18.90 × 17.70 in. It reads DST files.
Hoops
| Hoop | Sewing field | Largest design |
|---|---|---|
| Hoop A (3.5 × 3.5 in) | 3.50 × 3.50 in | 3.30 × 3.30 in |
| Hoop B (4.7 × 4.7 in) | 4.70 × 4.70 in | 4.50 × 4.50 in |
| Hoop C (6 × 6 in) | 5.90 × 5.90 in | 5.70 × 5.70 in |
| Hoop D (7.5 × 7.5 in) | 7.50 × 7.50 in | 7.30 × 7.30 in |
| Hoop E (11.4 × 11.4 in) | 11.40 × 11.40 in | 11.20 × 11.20 in |
| Maximum Embroidery Area (flat) (17.7 × 17.7 in) | 17.70 × 17.70 in | 17.50 × 17.50 in |
| Maximum Embroidery Area (chenille) (18.9 × 17.7 in) | 18.90 × 17.70 in | 18.70 × 17.50 in |
Will it fit? Common design sizes
Will a 4 × 4 in design fit? Yes
The smallest hoop it fits is the Hoop B (4.7 × 4.7 in).
Will a 5 × 7 in design fit? Yes
The smallest hoop it fits is the Hoop D (7.5 × 7.5 in).
Will a 6 × 10 in design fit? Yes
The smallest hoop it fits is the Hoop E (11.4 × 11.4 in).
Will a 8 × 8 in design fit? Yes
The smallest hoop it fits is the Hoop E (11.4 × 11.4 in).
Will a 8 × 12 in design fit? Yes
The smallest hoop it fits is the Maximum Embroidery Area (flat) (17.7 × 17.7 in).
Will a 10 × 10 in design fit? Yes
The smallest hoop it fits is the Hoop E (11.4 × 11.4 in).
Check your design on the Ricoma Embroidery and Chenille Combo
Enter the design's width and height to see the hoops it fits.
A design fits when each side is about 0.2 in or more smaller than the hoop's sewing field, as drawn or turned on its side.
Don't know the size? Open the embroidery file preview to measure it.
Ricoma Embroidery and Chenille Combo hoop questions
What is the largest hoop for the Ricoma Embroidery and Chenille Combo?
Maximum Embroidery Area (chenille) (18.9 × 17.7 in), a sewing field of 18.90 × 17.70 in, as published by Ricoma.
Will a 5 × 7 in design fit the Ricoma Embroidery and Chenille Combo?
Yes. A design made for a 5 × 7 in hoop fits the Hoop D (7.5 × 7.5 in).
Which embroidery file formats does the Ricoma Embroidery and Chenille Combo read?
The Ricoma Embroidery and Chenille Combo reads DST files.
Which common design sizes fit the Ricoma Embroidery and Chenille Combo?
Designs made for 4 × 4 in, 5 × 7 in, 6 × 10 in, 8 × 8 in, 8 × 12 in and 10 × 10 in hoops fit one of its hoops. Use the checker on this page for any other size.
Hoop sizes as published by Ricoma. Check your machine's manual for your exact hoop. Sizes checked November 5, 2026.
Keep your designs where you can find them.
Every design shown as a picture, with its size, and its colors where the file stores them.
No credit card needed

