How to get embroidery designs onto a USB stick for your machine
Choose the right file, prepare the drive and copy the design so your machine can find it. Then fix the usual reasons a machine doesn't see a design.
By Traci Bass · Reviewed by Patrick Bass · · 6 min read
To get embroidery designs onto a USB stick, unzip the download and pick the format and hoop size your machine reads. Copy the stitch file to the top of a FAT32 drive, or to the folder your machine names, then eject before unplugging. CraftKeep can do most of these steps for you, as the end of this guide shows.
You found the perfect design, the fabric is hooped, and the machine says it can't find any files. Machines care about three things: the format, the size, and where on the drive the file sits. The steps below cover each one, start to finish.
What do you need?
A USB drive, the unzipped design files and your machine's manual:
- A USB flash drive. A plain, inexpensive one is often the most reliable; check your machine's manual for any size limit it mentions.
- The design files, unzipped.
- Your machine's manual, or the manufacturer's specification page, for its formats and hoops.
Step 1: Which format does your machine read?
Your machine reads only some of the formats in a design download. Brands differ, and the manual lists the ones yours takes. A download usually contains the same design in many formats. Brother and Baby Lock machines typically read PES; Janome machines JEF; Husqvarna Viking and Pfaff machines VP3; many machines of every brand read DST.
Look up your machine in the free hoop fit checker to see the formats and hoops its manufacturer lists. If it reads several, prefer one that stores thread colors, such as PES or VP3. Your machine's screen then shows the right colors. Our guide to embroidery file formats explains the differences, and each format has its own page, for example PES, JEF and DST.
Step 2: Pick the right hoop size
Many design sets come in several sizes, each in its own folder: 4x4, 5x7, 6x10 and so on. Choose the folder for the hoop you will use. A design larger than your hoop's sewing field won't stitch in that hoop.
To check a single file, open it in the free embroidery file preview. The preview shows the design's size in inches and which common hoops it fits, without sending the file anywhere.
Step 3: Unzip first
Designs almost always arrive as ZIP files. Machines can't open ZIPs, so unzip the download on your computer first and copy the stitch file itself, not the ZIP, to the drive.
Step 4: Prepare the drive
Many embroidery machines expect a drive formatted as FAT32. BERNINA's firmware update guide, for example, asks for a stick formatted as FAT32 on a Windows computer. Drives sold today are sometimes formatted differently, especially larger ones. If your machine doesn't see a drive at all, formatting it as FAT32 is the first thing to try:
- Windows: right-click the drive in File Explorer, choose Format, pick FAT32 and start. Very large drives may not offer FAT32 in this window; a smaller drive is the easy fix.
- macOS: open Disk Utility, select the drive, choose Erase, and pick MS-DOS (FAT) as the format. Apple's Disk Utility guide suggests MS-DOS (FAT) for disks of 32 GB or less.
Formatting erases everything on the drive, so copy off anything you want to keep first. Your manual may name a different format; follow it if so.
Step 5: Copy the design to the right place
Most machines look at the top of the drive first, and how far they look into folders varies by model. Copy the design files straight onto the drive rather than burying them several folders deep. Some machines use a folder of their own instead. Janome machines make an EMB folder on the stick and look for designs in the EMBF folder inside it.
If you keep many designs on one stick, a few short folders are fine for most machines; check your manual for how deep it reads. Keep file names short and simple, since some machines show only the first few characters. The Brother PRS100 manual, for example, says the machine displays only the first eight characters of a file name.
Step 6: Eject safely
Use Eject (Windows) or drag to Eject (macOS) before pulling the drive out. Removing it mid-copy can leave a file that looks present but won't open.
Why doesn't my machine see the design?
Usually the format, a ZIP or the folder is wrong. Work through these in order:
- Wrong format. The machine shows nothing, or only some designs. Copy the format your machine lists.
- Still zipped. You copied the ZIP instead of the file inside it.
- Too deep. Move the file to the top of the drive, or to the folder your manual names, such as EMB on Janome machines.
- Too big for the hoop. Pick the design's smaller size, or a larger hoop.
- Drive format. Reformat the drive as FAT32, or try a smaller, plain drive.
- Damaged copy. Copy the file again, then eject properly before unplugging.
If a design loads but looks wrong on screen, for example in odd colors, the file may store no thread colors at all. Missing colors are normal for formats such as DST. Use the designer's color chart; the thread conversion guide helps if your threads are a different brand.
The faster way with CraftKeep

Doing this by hand means finding the design, unzipping it, choosing a format and a folder, and copying. In a CraftKeep library, most of those steps are already done:
- Every design is already unzipped into its project, with the designer's hoop-size folders kept. Every design shows as a stitch picture with its size and the hoop it fits.
- Add your machine on Your machines and each project opens on the formats it reads, so the right files are the ones in front of you. Fits my hoop then shows only the designs that fit the hoops you have.
- Send to USB: in Chrome or Edge on a computer, choose Send to USB on a design, a project or the files you've picked. CraftKeep copies them straight onto the drive. For a whole project you choose the top of the drive (recommended) or a folder named after the project. If a file with the same name is already on the drive, the new copy gets "(2)" added, so nothing is overwritten.
- Other browsers save the files to your Downloads folder instead, one file as it is or several as a ZIP, ready to copy across.
- The free add-on for Windows and Mac goes further. Set up for my machine formats the drive the way your machine expects. Clean this drive clears the hidden files computers leave. Designs land in the folder your machine looks in. See why a machine can't see designs.
Your library stays the master copy, so you can send the same design again whenever you need it. See the embroidery file organizer or the help article on downloading and sending to USB.
A quick checklist
- The format your machine lists, and the right hoop size
- Unzipped, not the ZIP
- Drive formatted as your manual asks, often FAT32
- Files at the top of the drive, with short names
- Eject before unplugging
Next: how to organize embroidery files so the right design is always easy to find before you reach for the USB stick.
Brother, BERNINA, Baby Lock, Janome, Pfaff, Husqvarna, Mac, macOS, Windows, Chrome are trademarks of their respective owners. CraftKeep is not affiliated with these companies.
Try it with your own files
Make a free CraftKeep library and see your machine embroidery files as pictures you can search.
No credit card needed

